Safety-Maintenance Precautions; Park And Prepare For Service Safely; Service Cooling System Safely - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Park and Prepare for Service Safely

Warn others of service work. Always park and prepare
machine for service or repair properly.
•
Park machine on a level surface and lower equipment
to the ground.
•
Place pilot shutoff lever in locked (UP) position. Stop
engine and remove key.
•
Attach a "Do Not Operate" tag in an obvious place in
the operator's station.
Securely support machine or attachment before working
under it.
•
Do not support machine with any hydraulically actuated
equipment.
•
Do not support machine with cinder blocks or wooden
pieces that may crumble or crush.
•
Do not support machine with a single jack or other
devices that may slip out of place.
Understand service procedures before beginning repairs.
Keep service area clean and dry. Use two people
whenever the engine must be running for service work.

Service Cooling System Safely

Explosive release of fluids from pressurized cooling
system can cause serious burns.
Do not service radiator through the radiator cap. Only fill
through the surge tank filler cap. Shut off engine. Only
remove surge tank filler cap when cool enough to touch
with bare hands. Slowly loosen cap to relieve pressure
before removing completely.
Safety—Maintenance Precautions
1-4-1
Do Not Operate Tag
Support Machine Properly
OUT4001,000089A -19-02JUL15-1/1
TX,SURGE -19-19JAN11-1/1
092221
PN=43