Operating The Am/Fm Radio - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Operating the AM/FM Radio

Press the radio power and volume switch (1) to turn on
the radio. Rotate the radio power and volume switch to
desired volume setting. Treble and base settings are
available through the monitor menu. For more information,
see Main Menu—Radio. (Section 2-2.)
Press the radio tuning switch (2) to toggle between AM
or FM frequency. Rotate radio tuning switch to tune
radio to desired AM or FM station. To find the clearest
reception stations for the area, use the seek function
that is available through the monitor menu. For more
information, see Main Menu—Radio. (Section 2-2.)
Press buttons 1—8 on the keypad (3) to move between
preset memory radio stations. Radio display (4) on
monitor shows the station and frequency setting that
corresponds with each keypad button.
NOTE: Presetting memory radio stations can also be
done using the monitor menu. Stations can be
automatically selected for the area using the auto
preset option in the monitor menu. For more
information, see Main Menu—Radio. (Section 2-2.)
To preset memory radio stations or to change previously
set stations using the keypad, tune radio to desired
station setting. Press and hold one of the keypad buttons
1—8 for more than 1 second. Setting is stored to that
corresponding button. Repeat procedure for seven other
desired stations.
1— Radio Power and Volume
Switch
2— Radio Tuning Switch
Operation—Operator's Station
3— Keypad
4— Radio Display
2-1-11
Radio Controls on Switch Panel
Radio Display on Monitor
OUT4001,0000743 -19-19FEB18-1/1
092221
PN=70