Worldwide Construction And Forestry Division 380GLC Operator's Manual page 196

JDLink™ In-Line Fuse—If Equipped
NOTE: JDLink in-line fuses may be equipped on early
and late serial number machines.
1. Turn machine off.
2. Open battery compartment access door.
3. Remove cap screws (2) from cover to access the 7.5
Amp JDLink™ unswitched power in-line fuse (1) on
the yellow wire.
4. To deactivate the JDLink™ Machine Monitoring
System, remove the unswitched power in-line fuse.
5. Install cover and cap screws.
6. Close access door.
1— JDLink™ Unswitched
Power In-Line Fuse
2— Cap Screws (3 used)
JDLink is a trademark of Deere & Company
Miscellaneous—Machine
3— JDLink™ Ground In-Line
Fuse (7.5 Amp)
4— JDLink™ Switched Power
In-Line Fuse (3 Amp)
4-1-11
Cover
JDLink In-line Fuse
ER79617,0000D1E -19-13APR16-4/4
092221
PN=196