Worldwide Construction And Forestry Division 380GLC Operator's Manual page 210

Monitor, Gauges, and
Battery Relay Checks
TX1087186A —UN—28JUN13
1— Work Mode Indicator
2— Exhaust Filter Auto Cleaning Disabled Indicator
3— Power Mode Indicator
4— Hour Meter
5— Engine Coolant Temperature Gauge
6— Fuel Gauge
7— Travel Mode Indicator
NOTE: The exhaust filter auto cleaning disabled indicator will display on the
NOTE: If engine coolant temperature is below 30°C (86°F) engine
Turn key switch to ON.
LISTEN: Does battery relay click?
LOOK: Does engine coolant temperature gauge (5) display correct engine coolant
temperature?
LOOK: Does fuel gauge (6) display correct fuel level?
LOOK: Does hour meter (4) display machine hours?
LOOK: Does work mode indicator (1) display correct work mode (dig or attachment)?
LOOK: Does travel mode indicator (7) display correct travel mode?
LOOK: Does power mode indicator (3) display correct power mode?
Miscellaneous—Operational Checkout
Default Screen
monitor when the key switch is in ON position. Once the engine is
started, the indicator will disappear unless exhaust filter auto cleaning
has been disabled by the operator through the monitor.
temperature gauge needle may not move.
4-2-5
Continued on next page
YES: Go to next check.
NO: See your authorized
dealer.
CN93077,000003A -19-16MAY13-9/53
092221
PN=210