Replace Pilot Oil Filter - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Replace Pilot Oil Filter

CAUTION: High pressure release of oil from
pressurized system can cause serious burns
or penetrating injury. The hydraulic tank is
pressurized. Relieve pressure by pushing
the pressure release button (5).
1. To relieve hydraulic pressure push the pressure
release button (5).
2. Open right service door to access pilot oil filter (4).
3. Remove filter canister (1) from head cover by turning
counterclockwise.
4. Clean head cover contact area.
5. Remove filter element (2) and O-ring (3).
6. Install new O-ring and filter element.
7. Install filter canister clockwise by hand. Check for any
leakage.
1— Filter Canister
2— Filter Element
3— O-Ring
Maintenance—Every 1000 Hours
4— Pilot Oil Filter
5— Pressure Release Button
3-9-3
Hydraulic Tank Cover
Pilot Oil Filter
Filter Canister
ER79617,0000DF2 -19-10JUN11-1/1
092221
PN=175