Fire Extinguisher Mounting Location; Alternative Exit Tool - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Fire Extinguisher Mounting Location

MOUNTING LOCATION:
The designated fire extinguisher mounting location (1) is
inside the cab on the left rear side.
USE:
NOTE: All fire extinguishers do not operate the same.
Read operating instructions on canister.
The portable fire extinguisher is used to aid in the
extinguishing of small fires. Refer to individual
manufacturer's instructions and proper fire fighting
procedures before the need to use the fire extinguisher
arises. See Prevent Fires. (Section 1-2.)
MAINTENANCE:
IMPORTANT: Avoid possible machine damage. Check
gauge (if equipped) on fire extinguisher. If fire
extinguisher is not fully charged, recharge
or replace fire extinguisher according to the
manufacturer's instructions.
Inspect and maintain the fire extinguisher following the
manufacturer's recommendations and all local, regional,
and national regulations.

Alternative Exit Tool

IMPORTANT: For alternative exit of machine, use
the alternative exit tool (1) to break window.
Always keep tool inside cab.
Alternative exit tool (1) is located on the left roll-over
protective structure (ROPS) post.
1— Alternative Exit Tool
Operation—Operator's Station
1— Fire Extinguisher Mounting
Location
2-1-12
Fire Extinguisher Mounting Location
ER79617,0000D80 -19-14MAR16-1/1
Alternative Exit Tool
ER79617,0000D4F -19-08NOV17-1/1
092221
PN=71