Check Engine Coolant Level - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Check Engine Coolant Level

CAUTION: Prevent possible injury from hot
spraying fluids. Shut off engine. Remove filler
cap only when cool enough to touch with bare
hands. Slowly loosen cap to relieve pressure
before removing completely.
IMPORTANT: Avoid machine damage. Mixing different
coolant types can degrade coolant and machine
performance. Avoid mixing different brands
or types of coolant. Coolant manufacturers
engineer their coolants to meet certain
specifications and performance requirements.
1. Open engine cover and check coolant level in surge
tank (1).
2. With engine cold, coolant level must be between MIN
COLD and MAX COLD marks on surge tank.
3. If coolant is below MIN COLD mark, add coolant to
surge tank. See Heavy Duty Diesel Engine Coolant.
(Section 3-1.)
4. If surge tank is empty, check for leaks in tank, hoses,
and radiator. Repair as required, then refill with
coolant.
5. Close engine cover.
1— Surge Tank
Maintenance—Every 10 Hours or Daily
3-4-2
Service Cooling System Safely
Surge Tank
DB84312,00000E3 -19-21MAR13-1/1
092221
PN=154