Maintenance-Every 250 Hours; Check Swing Gear Case Oil Level - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Check Swing Gear Case Oil Level

1. Park machine on a level surface.
2. Remove dipstick (1). Wipe dipstick clean and replace
completely into tube.
3. Remove dipstick. Oil must be in the dipstick
cross-hatch area (3).
4. If oil is needed, remove filler cap (2) and add oil.
5. Check oil level.
6. Install filler cap.
1— Dipstick
2— Filler Cap
Maintenance—Every 250 Hours
3— Dipstick Cross-Hatch Area
3-7-1
Swing Gear Case
3
ADD FULL
Dipstick Cross-Hatch Area
ER79617,0000AF0 -19-11MAR14-1/1
092221
PN=160