Towing Machine; Lifting The Machine - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Towing Machine

CAUTION: Prevent possible injury from
unexpected machine movement. Block
both tracks when disconnecting travel
gear cases. When travel gear cases are
disconnected, machine has no brakes and
can move. The machine will roll free on a
slope or while being towed.
1. Block tracks.
2. Drain oil from each travel gear case.
3. Remove cover from each gear case.
4. Remove sun gear (1) from each gear case.
5. Install cover. Fill gear case with oil.

Lifting the Machine

CAUTION: Prevent possible injury from
unexpected machine movement when lifting
the machine. Check lifting capacity of crane
before lifting the excavator. Lift load only
as high as necessary.
Keep all people clear of raised load.
NOTE: The center of gravity (2) will vary depending
on the kind of attachment.
NOTE: Refer to decals on machine for correct lift
points (1). There are 2 lift points on each
side of the undercarriage.
1. Fully extend boom, arm, and bucket cylinders.
2. Position boom straight ahead of the upperstructure.
3. Turn key switch to OFF. Remove key from switch.
4. Pull pilot control shutoff lever to locked position.
5. Route appropriate lifting device through lifting points (1)
and under both sides of the track frame as illustrated.
6. Attach appropriate lifting device to crane.
Operation—Operating the Machine
1— Sun Gear
1— Lifting Points
2— Center of Gravity
7. Slowly lift machine.
Lifting Machine—Approx-
imate Weight............................................................................ 37 200 kg
2-3-23
Sun Gear
ER79617,0000AED -19-09FEB12-1/1
Lifting Machine
3— Support Bar
Specification
JS93577,00008F7 -19-02APR14-1/1
82 012 lb.
092221
PN=124