Diesel Engine Oil
Use oil viscosity based on the expected air temperature
range during the period between oil changes.
John Deere Plus-50™ II is the recommended
engine oil.
Extended service intervals may apply when John Deere
Plus-50 II engine oil is used. Refer to the engine oil drain
interval table and consult your John Deere dealer for more
information.
If John Deere Plus-50 II engine oil is not available, engine
oil meeting one or more of the following may be used:
•
API Service Category CJ-4
•
ACEA Oil Sequence E9
•
ACEA Oil Sequence E6
DO NOT use engine oil containing more than 1.0%
sulfated ash, 0.12% phosphorus, or 0.4% sulfur.
Multi-viscosity diesel engine oils are preferred.
Diesel fuel quality and fuel sulfur content must comply
with all existing emissions regulations for the area in
which the engine operates.
IMPORTANT: Use only ultra low sulfur diesel
(ULSD) fuel with a maximum sulfur content
of 15 mg/kg (15 ppm).
Plus-50 is a trademark of Deere & Company
Maintenance—Machine
Oil Viscosities for Air Temperature Ranges
3-1-8
50˚C
122˚F
40˚C
104˚F
30˚C
86˚F
20˚C
68˚F
10˚C
50˚F
0˚C
32˚F
-10˚C
14˚F
-20˚C
-4˚F
-30˚C
-22˚F
-40˚C
-40˚F
OUT4001,0000B93 -19-02OCT12-1/1
092221
PN=132