Worldwide Construction And Forestry Division 380GLC Operator's Manual page 82

•Engine Start Disabled Alarm—Engine will not start due
to pilot shutoff lever being lowered.
•Engine Overheat Alarm—Engine coolant temperature
has abnormally increased. Stop operation. Run the engine
at slow idle speed or lower the coolant temperature.
• Cold Fluid Component Protection (CFCP)
Alarm—This alarm appears when engine and hydraulic
oils are very cold. Allow machine to warm up until
indicator light disappears.
•Warning Alarm—An abnormal condition has been
detected. Alarm will either be red or yellow depending on
severity of problem. Contact your authorized John Deere
dealer.
•Programming Alarm—If this Service ADVISOR™
Remote (SAR) programming alarm appears on the
monitor, different conditions may exist depending on the
color. If this alarm is:
•
YELLOW—Service ADVISOR™ Remote (SAR)
software update is ready to install.
•
RED—SAR programming is in process. Do not turn
OFF machine power until programming is complete.
Service ADVISOR is a trademark of Deere & Company
Operation—Monitor Operation
TX1086354 —UN—06JAN11
TX1086350 —UN—06JAN11
TX1241579 —UN—11JUL17
TX1086352 —UN—06JAN11
TX1087187 —UN—21JAN11
•
GREEN—SAR programming is complete and cycle
machine power to complete the process.
Continued on next page
2-2-7
Engine Start Disabled Alarm
DB84312,000002D -19-28JUL17-7/25
Engine Overheat Alarm
DB84312,000002D -19-28JUL17-8/25
CFCP Alarm
DB84312,000002D -19-28JUL17-9/25
Warning Alarm
DB84312,000002D -19-28JUL17-10/25
Programming Alarm
DB84312,000002D -19-28JUL17-11/25
092221
PN=82