Worldwide Construction And Forestry Division 380GLC Operator's Manual page 3

Manual Identification—READ THIS FIRST!
IMPORTANT: Use only supporting manuals
designated for your specific machine. If
incorrect manual is chosen, improper service
may occur. Verify product identification number
(PIN) when choosing the correct manual.
Choosing the Correct Supporting Manuals
John Deere excavators are available in different machine
configurations based on the various markets into which
they are sold. Different supporting manuals exist for
different machine configurations.
When necessary, product identification numbers are listed
on the front covers of excavator manuals. These numbers
are used to identify the correct supporting manual for your
machine.
Product Identification Number
The product identification number (PIN) plate (1) is located
on the front, right corner of the cab. Each machine has a
17-character PIN (2) shown on PIN plate.
Introduction
PIN Plate Location—Early Production
PIN Plate Location—Late Production
Product Identification Number
1FF380GXLCE900001
EXCAVATOR 380G
1— PIN Plate
Continued on next page
1
Example of PIN Plate
2— 17-Character PIN
CN93077,0000046 -19-19MAY14-1/2
2
092221
PN=3