Inspect Machine; Stay Clear Of Moving Parts; Avoid High-Pressure Fluids - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Safety—General Precautions

Inspect Machine

Inspect machine carefully each day by walking around it
before starting.
Keep all guards and shields in good condition and properly
installed. Fix damage and replace worn or broken parts
immediately. Pay special attention to hydraulic hoses and
electrical wiring.
TX,INSPECT -19-08SEP10-1/1

Stay Clear of Moving Parts

Entanglements in moving parts can cause serious injury.
Stop engine before examining, adjusting, or maintaining
any part of machine with moving parts.
Keep guards and shields in place. Replace any guard
or shield that has been removed for access as soon as
service or repair is complete.
TX,MOVING,PARTS -19-20JAN11-1/1

Avoid High-Pressure Fluids

Escaping fluid under pressure can penetrate the skin
causing serious injury.
Avoid the hazard by relieving pressure before
disconnecting hydraulic or other lines. Tighten all
connections before applying pressure.
Search for leaks with a piece of cardboard. Protect hands
and body from high-pressure fluids.
If an accident occurs, see a doctor immediately. Any fluid
injected into the skin must be surgically removed within
a few hours or gangrene may result. Doctors unfamiliar
with this type of injury should reference a knowledgeable
medical source. Such information is available from Deere
& Company Medical Department in Moline, Illinois, U.S.A.
TX,FLUID -19-08JUN20-1/1
1-2-3 092221
PN=32