Loading And Unloading For Transport - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Loading and Unloading for Transport

CAUTION: Use extra care to prevent tipover
or unexpected movement when loading and
unloading machine for transport. Observe these
rules when loading and unloading machine:
•
Keep the trailer bed clean.
•
Locate trailer on a level and stable surface.
•
Chock trailer wheels.
•
Always wear seat belt.
•
Use loading ramps. Keep ramps at a low
angle and firmly attached to trailer.
•
Turn auto-idle switch to the A/I OFF position.
Use slow speed operating modes and
move machine carefully.
1. When loading machine, use bucket for support with
angle of arm to boom at 90° (1).
IMPORTANT: Prevent machine or trailer damage. DO
NOT allow machine or bucket to impact trailer.
2. Position machine on trailer as shown. Fasten machine
to trailer at designated tie down (2) areas.
3. When unloading machine, use bucket for support with
angle of arm to boom at 90°.
1— 90° Arm to Boom
Operation—Operating the Machine
2— Tie Down (4 used)
2-3-22
Loading Machine On A Trailer
Moving Machine On Trailer
Tie Downs (front side shown)
Unloading Machine From A Trailer
ER79617,0000D83 -19-19MAR12-1/1
092221
PN=123