14. Key Switch—Switch has four positions:
•
OFF
•
ACC
•
ON
•
START
15. Keypad—Keypad has a few different applications:
Rear Left Panel
Lighter (1): For operator convenience. Can also be used
as an electrical port for 24-volt appliances only.
Accessory Power Port (2): 12-volt, 5-amp electrical port
provided for service and maintenance.
1— Lighter
Horn
Horn button (1) is located on top of left control lever.
1— Horn Button
Power Boost Button
The power boost button (1) is located on the right pilot
control lever. Press and hold down power boost button for
an 8-second increase in hydraulic power. Release button
to reset power boost function.
Power boost is automatically activated when the following
conditions are met:
•
Boom up
•
No arm in
•
High delivery pressure
1— Power Boost Button
Operation—Operator's Station
2— Accessory Power Port
2-1-4
•
Use numbers 0—9 to enter password at machine
start-up (if equipped).
•
Press keypad numbers 1—8 while the radio is ON to
switch between programmed stations.
•
When work light switch is in position 2, the monitor
changes to night mode display (background lighting is
dimmed). Press and hold the number 0 on keypad to
change monitor back to daytime mode display.
Rear Left Panel
Horn Button
3-Button Pilot Control Lever Shown
OUT4001,000073C -19-28FEB18-2/2
ER79617,0000D57 -19-29MAY14-1/1
ER79617,0000D6E -19-27DEC10-1/1
OUT4001,000073D -19-22FEB18-1/1
092221
PN=63