Drain Water And Sediment From Hydraulic Tank - Worldwide Construction And Forestry Division 380GLC Operator's Manual

Drain Water and Sediment From Hydraulic
Tank
1. Park machine on a level surface.
2. Stop engine.
CAUTION: High pressure release of oil from
pressurized system can cause serious burns
or penetrating injury. The hydraulic tank is
pressurized. Relieve pressure by pushing
the pressure release button (1).
3. Push the pressure release button (1) to relieve
pressure.
4. Remove cap screws (3).
5. Remove hydraulic tank oil cover (2).
NOTE: Drain waste into a container. Dispose
of waste properly.
6. After oil is cool, loosen drain valve cap screw (4) for
several seconds to drain water and sediment into
a container. Do not remove cap screw completely.
Dispose of waste properly.
7. Check hydraulic oil level. See Check Hydraulic Tank
Oil Level. (Section 3-4.)
8. Tighten drain valve cap screw, and install hydraulic
tank oil cover and cap screws.
1— Pressure Release Button
2— Hydraulic Tank Oil Cover
Maintenance—Every 250 Hours
3— Cap Screw (4 used)
4— Drain Valve Cap Screw
3-7-2
Pressurized Fluids
Hydraulic Tank Oil Cover
Drain Valve Cap Screw
ER79617,0000DE0 -19-22AUG12-1/1
092221
PN=161