Map 1320: Service Focal Point - IBM eserver p Series Service Manual

Hide thumbs Also See for eserver p Series:

Table of Contents

MAP 1320: Service Focal Point

These procedures define the steps to take when servicing a machine that is equipped with Service Focal

Point (SFP). You might also be directed to these procedures if the system is running Linux as its only

operating system.

Note: If the system is attached to an HMC and Service Focal Point is enabled, the various codes that

might display on the HMC are all listed as error codes by Service Focal Point (SFP). To assist you

in identifying the types of error data in this guide, use the following table.

Number of Digits in Error Code

For steps to be taken when beginning service on a machine with SFP, see the "MAP 1321: Quick Entry

MAP for Systems with Service Focal Point" on page 96.

For steps to be taken after service is complete on a machine with SFP, see the "MAP 1322: End of Call

MAP for Systems with Service Focal Point" on page 109.

Contains # (pound sign)

Contains - (hyphen)

Does not contain # or -

Name Used in this Service Guide

Error Code, Service Reference Code

Chapter 3. Maintenance Analysis Procedures

Eserver p650