IBM eserver p Series Service Manual page 289

Hide thumbs Also See for eserver p Series:
Table of Contents

Advertisement

Error Code Description
20EE 0007 Keyboard not found
20EE 0008 No configurable adapters found in the system
by the remote IPL menu in the SMS utilities.
20EE 0009 Unable to communicate with the service
processor/PCI backplane
20EE 000A The image size on the boot or installation
device exceeds the system firmware memory
limitations
20EE 000B The system was not able to find an operating
system on the devices in the boot list.
Action/
Possible Failing FRU
1. Plug in the keyboard.
2. Replace the keyboard.
3. If the keyboard is plugged into the
processor subsystem, replace the service
processor/PCI backplane.
4. If the keyboard is plugged into a USB card,
replace the USB card.
This warning occurs when the remote IPL
menu in the SMS utilities cannot locate any
LAN adapters that are supported by the remote
IPL function. If a supported device is installed:
1. Replace the device or adapter. (See notes
on 241.)
2. Replace the I/O drawer backplane in the
drawer that contains the adapter.
Replace the service processor/PCI backplane,
Location: U0.1-P2
1. Check for system firmware updates. Apply if
available.
2. Call service support.
Go to "Boot Problems" on page 237.
Chapter 5. Error Code to FRU Index
269

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eserver p650

Table of Contents