IBM eserver p Series Service Manual page 594

Hide thumbs Also See for eserver p Series:

Table of Contents

7. Remove the metal EMC shield from the top of the tailstock.

8. Remove the blank filler or adapter that is installed in the cassette linkage assembly.

Note: If there is a blank filler in the cassette linkage assembly, as shipped from the manufacturer,

there are two adapter arms. One adapter arm is used with short adapters (short adapter arm)

and the other adapter arm is used with long adapters (long adapter arm).

If you are removing a short adapter or blank filler, see "Short Adapter or Blank Filler Removal" on page

If you are removing a long adapter, see "Long Adapter Removal" on page 577.

EserverpSeries 650 Service Guide

1 Metal EMC Shield

Eserver p650