IBM eserver p Series Service Manual page 596

Hide thumbs Also See for eserver p Series:

Table of Contents

2. Remove the adapter or blank filler from the cassette linkage assembly by rotating the bottom of the

tailstock out, as shown in the following illustration. Store the adapter or blank filler in a safe place.

3. The removal procedure for the PCI adapter cassette assembly is complete. To install a new adapter or

blank filler in the cassette, go to "Installing a Hot-Pluggable PCI Adapter" on page 563.

EserverpSeries 650 Service Guide

1 Cassette Linkage Assembly

2 Bottom of Tailstock

Eserver p650