Table of Contents
Advertisement
Table 5. SPCN Error Codes for I/O Subsystems (continued)
Error Code Description
1nn1 840E I/O type mismatch
1nn1 8A00 The SPCN firmware has detected a change in
the drawer configuration.
1nn1 C62E Polling error
260
EserverpSeries 650 Service Guide
Action/
Possible Failing FRU
1. Check cabling
2. Set the I/O type. See Power Control
Network Utilities Menu on page 493.
3. I/O subsystem backplane
Location: U0.dd-P1
See the notices on page 255 for "dd" values.
Informational message
I/O subsystem backplane,
Location: U0.dd-P1
See the notices on page 255 for "dd" values.
Advertisement
Table of Contents
