IBM eserver p Series Service Manual page 405

Table 6. Service Processor Error Codes. (continued)
Error Code Description
406D 0B22 Problem with RIO interface (I/O slot 2, I/O port
2)
406D 0B23 Problem with RIO interface (I/O slot 2, I/O port
3)
406D 0B30 Reserved
406D 0B31 Reserved
406D 0B32 Problem with RIO interface (I/O slot 3, I/O port
2)
406D 0B33 Problem with RIO interface (I/O slot 3, I/O port
3)
406D 0B40 Problem with controller chip on service
processor/PCI backplane
406D 0BF0 Problem with controller chip on service
processor/PCI backplane
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2
4. Call service support.
Call service support.
Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2.1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2.1
4. Call service support.
1. Service processor/PCI backplane,
Location: U0.1-P2
2. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1 and the I/O
subsystems.
3. RIO riser card,
Location: U0.1-P1-H1
4. Service processor/PCI backplane,
Location: U0.1-P2
5. System backplane,
Location: U0.1-P1
6. Call service support.
Chapter 5. Error Code to FRU Index
385