IBM eserver p Series Service Manual page 254

Hide thumbs Also See for eserver p Series:
Table of Contents

Advertisement

Table 2. Firmware Checkpoints (continued)
Checkpoint
E7EE
E7FF
E800
E841
E842
E843
E844
E845
E846
E84F
E850
E851
E852
E853
234
EserverpSeries 650 Service Guide
Description
Delaying while waiting for power subsystem
VPD collection to be completed;
informational only
Successful end of VPD creation
RTAS initialization problem
Initializing RTAS/open firmware device tree
interface
Initializing RTAS/service processor interface 1. Check for system firmware updates.
Initializing RTAS/sensor interface
Initializing RTAS/time-of-day clock interface
Initializing interface/sensor access
Initializing interface/sensors/LED-table
access
Initializing RTAS/operator panel interface
Initializing RTAS/cache interface
Initializing RTAS/hardware access
Initializing RTAS/PCI bus interface
Start cable ID request process
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Call service support.
Informational message. If the system hangs
here, go to "MAP 1541: JTAG Problem
Isolation" on page 141.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
2. Replace the service processor/PCI
backplane
Location: U0.1-P2.
3. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Replace the service processor/PCI
backplane
Location: U0.1-P2.
3. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Go to "MAP 1542: I/O Problem
Isolation" on page 144.
3. Call service support.
1. Check the SPCN and RIO cabling to
the I/O subystems.
2. Remove, then reapply power to the
system.
3. Go to "MAP 1542: I/O Problem
Isolation" on page 144.
4. Call service support.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eserver p650

Table of Contents