Table of Contents
Advertisement
Step 1422-11
Insert a new adapter of the same type recorded in "Step 1422-1" on page 115 into the slot assigned in
"Step 1422-10" on page 116.
Step 1422-12
Move any external cabling from the adapter in the slot recorded in "Step 1422-1" on page 115 to the
adapter in the slot assigned in "Step 1422-10" on page 116.
Step 1422-13
Attempt to boot the partition.
Does the partition boot?.
No
Go to "Step 1422-14."
Yes
Partition and all resources are operational. Schedule repair for the slot recorded in "Step 1422-1"
on page 115 with the customer. Go to "MAP 0410: Repair Checkout" in the Eserver pSeries
Diagnostic Information for Multiple Bus Systems. This ends the procedure.
Step 1422-14
Cannot repair the adapter without powering off the entire system. Schedule repair for the slot recorded in
"Step 1422-1" on page 115 with the customer. This ends the procedure.
Chapter 3. Maintenance Analysis Procedures
117
Advertisement
Table of Contents
