IBM eserver p Series Service Manual page 335

Table 6. Service Processor Error Codes. (continued)
Error Code Description
4066 0B03 Problem with RIO interface (I/O slot 0, I/O port
3)
4066 0B10 Reserved
4066 0B11 Reserved
4066 0B12 Problem with RIO interface (I/O slot 1, I/O port
2)
4066 0B13 Problem with RIO interface (I/O slot 1, I/O port
3)
4066 0B20 Reserved
4066 0B21 Reserved
4066 0B22 Problem with RIO interface (I/O slot 2, I/O port
2)
4066 0B23 Problem with RIO interface (I/O slot 2, I/O port
3)
4066 0B30 Reserved
4066 0B31 Reserved
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1 and the I/O
subsystems.
3. RIO riser card,
Location: U0.1-P1-H1
4. Call service support.
Call service support.
Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H1.1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H1.1
4. Call service support.
Call service support.
Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H2 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H2
4. Call service support.
Call service support.
Call service support.
Chapter 5. Error Code to FRU Index
315