IBM eserver p Series Service Manual page 384

Table 6. Service Processor Error Codes. (continued)
Error Code Description
406B 0B00 Problem with internal RIO interface (I/O slot 0,
I/O port 0)
406B 0B01 Problem with internal RIO interface (I/O slot 0,
I/O port 1)
406B 0B02 Problem with RIO interface (I/O slot 0, I/O port
2)
406B 0B03 Problem with RIO interface (I/O slot 0, I/O port
3)
406B 0B10 Reserved
406B 0B11 Reserved
406B 0B12 Problem with RIO interface (I/O slot 1, I/O port
2)
406B 0B13 Problem with RIO interface (I/O slot 1, I/O port
3)
406B 0B20 Reserved
406B 0B21 Reserved
364 EserverpSeries 650 Service Guide
Action/
Possible Failing FRU
1. Check for system firmware updates.
2. RIO riser card,
Location: U0.1-P1-H1
3. Service processor/PCI backplane,
Location:U0.1-P2
4. System board,
Location: U0.1-P1
1. Check for system firmware updates.
2. RIO riser card,
Location: U0.1-P1-H1
3. Service processor/PCI backplane,
Location:U0.1-P2
4. System board,
Location: U0.1-P1
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1 and the I/O
subsystems.
3. RIO riser card,
Location: U0.1-P1-H1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1 and the I/O
subsystems.
3. RIO riser card,
Location: U0.1-P1-H1
4. Call service support.
Call service support.
Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H1.1
4. Call service support.
1. Check for system firmware updates.
2. Check the cabling between the RIO
interface card at U0.1-P1-H1.1 and the I/O
subsystems.
3. RIO connector extension card,
Location: U0.1-P1-H1.1
4. Call service support.
Call service support.
Call service support.