Table of Contents
Advertisement
Error Code Description
20EE 0011 Unable to execute the root-lpar-vpd vpd
method
20EE 0012 Unable to execute the mem-dimm-vpd method
20EE 0013 Unable to allocate memory for root-lpar-vpd
vpd
20EE 0014 Unable to allocate memory for root-lpar-vpd
location codes
20EE 0020 The environment variable "boot-device"
exceeds the allowed character limit.
20EE 0021 The environment variable "boot-device"
contained more than five entries.
20EE 0022 The environment variable "boot-device"
contained an entry that exceeded 255
characters in length.
Action/
Possible Failing FRU
1. Verify that the system is in LPAR mode,
and reboot the system.
2. Reflash the system with the latest level of
system firmware.
3. Call service support.
1. Verify that the system is in LPAR mode,
and reboot the system.
2. Reflash the system with the latest level of
system firmware.
3. Call service support.
1. Verify that the system is in LPAR mode,
and reboot the system.
2. Reflash the system with the latest level of
system firmware.
3. Call service support.
1. Verify that the system is in LPAR mode,
and reboot the system.
2. Reflash the system with the latest level of
system firmware.
3. Call service support.
If this error occurs during the installation of AIX
via a "NIM push", the set_bootlist attribute may
not have been set correctly on the NIM master.
For more information, see the "AIX 5.2
Installation Guide and Reference", order
number SC23-4389. If this error occurs at any
other time:
1. Check for platform firmware updates. Apply
if available.
2. Call service support.
If this error occurs during the installation of AIX
via a "NIM push", the set_bootlist attribute may
not have been set correctly on the NIM master.
For more information, see the "AIX 5.2
Installation Guide and Reference", order
number SC23-4389. If this error occurs at any
other time:
1. Check for platform firmware updates. Apply
if available.
2. Call service support.
If this error occurs during the installation of AIX
via a "NIM push", the set_bootlist attribute may
not have been set correctly on the NIM master.
For more information, see the "AIX 5.2
Installation Guide and Reference", order
number SC23-4389. If this error occurs at any
other time:
1. Check for platform firmware updates. Apply
if available.
2. Call service support.
Chapter 5. Error Code to FRU Index
271
Advertisement
Table of Contents
