IBM eserver p Series Service Manual page 434

Table 6. Service Processor Error Codes. (continued)
Error Code Description
4503 302E This error code indicates that the memory
repeat gard function has deconfigured a quad
of memory.
4503 302F This error code indicates that the memory
repeat gard function has deconfigured a quad
of memory.
414 EserverpSeries 650 Service Guide
Action/
Possible Failing FRU
Do the following:
1. Go to the memory
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the DIMMs. If any of
the DIMMs have a status of "manually
deconfigured", reconfigure the DIMMs and
boot the system to the SMS menus. Shut
down the system using the white power
button and look again at the status of the
DIMMs.
If all of the DIMMs are still configured in the
memory configuration/deconfiguration
menu, the problem has been resolved.
If any of the DIMMs have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
step 2.
2. Replace the quad of memory containing the
DIMM specified by the location code. The
entire quad of memory must be replaced.
Do the following:
1. Go to the memory
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the DIMMs. If any of
the DIMMs have a status of "manually
deconfigured", reconfigure the DIMMs and
boot the system to the SMS menus. Shut
down the system using the white power
button and look again at the status of the
DIMMs.
If all of the DIMMs are still configured in the
memory configuration/deconfiguration
menu, the problem has been resolved.
If any of the DIMMs have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
step 2.
2. Replace the quad of memory containing the
DIMM specified by the location code. The
entire quad of memory must be replaced.