IBM eserver p Series Service Manual page 576

Hide thumbs Also See for eserver p Series:

Table of Contents

3. Examine the PCI adapter slot opening carefully, and note the location of the dovetail rails and the

cassette guide rails. A flashlight can be used to enable you to see the dovetail rails and the cassette

guide rail slots, as shown in the following illustration.

1 Cassette Left Dovetail Rail

2 Cassette Right Dovetail Rail

3 Cassette Side Guide Rail

4. Hold the PCI adapter cassette at the PCI adapter slot so that the PCI adapter cassette is

perpendicular to the slot and level with the slot opening.

5. Align the bottom edge of the PCI cassette cover with the PCI cassette guide rail on the system board

or I/O unit.

6. Slide the cassette partially into the guide.

If the cassette does not slide in smoothly, the cover might not have engaged the PCI

cassette guide rail. Carefully pull the adapter back out and start again.

7. As you slide the cassette into the slot, ensure that the dovetail rail on the top of the PCI adapter

cassette aligns with the mating slots on any cassettes that might be installed on the left and right

8. Push the cassette in until it is flush with any other installed cassettes.

EserverpSeries 650 Service Guide

4 Cassette Bottom Guide Rail

5 Side Guide Rail Slot on System Board

6 Bottom Guide Rail Slot on System Board

Eserver p650