Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4503 25EC This error code indicates that the processor
repeat gard function has deconfigured a
processor.
4503 25EF This error code indicates that the processor
repeat gard function has deconfigured a
processor.
410
EserverpSeries 650 Service Guide
Action/
Possible Failing FRU
Do the following:
1. Go to the processor
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the processors. If any
of the processors have a status of
"manually deconfigured", reconfigure the
processor(s) and boot the system to the
SMS menus. Power down the system using
the white power button and look again at
the status of the processors.
If all of the processors are still configured in
the processor configuration/deconfiguration
menu, the problem has been resolved.
If any of the processors have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
2.
2. Replace the processor card (on which the
deconfigured processor resides) specified
by the location code.
Do the following:
1. Go to the processor
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the processors. If any
of the processors have a status of
"manually deconfigured", reconfigure the
processor(s) and boot the system to the
SMS menus. Power down the system using
the white power button and look again at
the status of the processors.
If all of the processors are still configured in
the processor configuration/deconfiguration
menu, the problem has been resolved.
If any of the processors have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
2.
2. Replace the processor card (on which the
deconfigured processor resides) specified
by the location code.
Advertisement
Table of Contents
