IBM eserver p Series Service Manual page 500

Hide thumbs Also See for eserver p Series:

Table of Contents

A listing at the top of the main menu contains the following:

v Your system's current firmware version

v The firmware copyright notice

v The system name given to your server during setup

You need the firmware version for reference when you either update or repair the functions of your service

The system name, an optional field, is the name that your server reports in problem messages. This name

helps your support team (for example, your system administrator, network administrator, or service

representative) to more quickly identify the location, configuration, and history of your server. Set the

system name, from the main menu, using option 6.

Note: The information under the Service Processor Firmware heading in the following Main Menu

illustration is example information only.

Service Processor Firmware

VERSION: RH011007

1. Service Processor Setup Menu

2. System Power Control Menu

3. System Information Menu

4. Language Selection Menu

5. Call-In/Call-Out Setup Menu

6. Set System Name

99. Exit from Menus

v Service Processor Setup Menu

See "Service Processor Setup Menu" on page 481 for more information.

v System Power Control Menu

See "System Power Control Menu" on page 486 for more information.

v System Information Menu

See "System Information Menu" on page 490 for more information.

v Language Selection Menu

See "Language Selection Menu" on page 499 for more information.

v Call-In/Call-Out Setup Menu

See "Call-In/Call-Out Setup Menu" on page 500 for more information.

EserverpSeries 650 Service Guide

Eserver p650