Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
Error Code Description
4503 25F4 This error code indicates that the processor
repeat gard function has deconfigured a
processor.
4503 301A This error code indicates that the memory
repeat gard function has deconfigured a quad
of memory.
Action/
Possible Failing FRU
Do the following:
1. Go to the processor
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the processors. If any
of the processors have a status of
"manually deconfigured", reconfigure the
processor(s) and boot the system to the
SMS menus. Power down the system using
the white power button and look again at
the status of the processors.
If all of the processors are still configured in
the processor configuration/deconfiguration
menu, the problem has been resolved.
If any of the processors have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
2.
2. Replace the processor card (on which the
deconfigured processor resides) specified
by the location code.
Do the following:
1. Go to the memory
configuration/deconfiguration menu, which
is under the system information menu in the
service processor menus.
Look at the status of the DIMMs. If any of
the DIMMs have a status of "manually
deconfigured", reconfigure the DIMMs and
boot the system to the SMS menus. Shut
down the system using the white power
button and look again at the status of the
DIMMs.
If all of the DIMMs are still configured in the
memory configuration/deconfiguration
menu, the problem has been resolved.
If any of the DIMMs have a status of
"deconfigured by the system", either before
or after the boot to the SMS menus, go to
step 2.
2. Replace the quad of memory containing the
DIMM specified by the location code. The
entire quad of memory must be replaced.
Chapter 5. Error Code to FRU Index
411
Advertisement
Table of Contents
