Service
Service
12
12.1 Resetting to Factory Settings
The device can be reset to the factory settings. Use the WAGO I/O Field Webserver for
this purpose.
You can find information on the procedure in
Settings
12.2 Updating Firmware
The firmware of the module can be updated. Use the WAGO I/O Field Webserver for this
purpose.
You need the firmware file corresponding to the module type. The name of the firmware
file is always FWUPDATE.zip; you can store it in a folder with the name of the module
(e.g., "765-1101").
You can find information on performing firmware updates in
112
Product manual | Version: 2.0.0
8DIO FLD EC DC 24V 2.0A
[} 68].
8 Resetsetting the Module to the Factory
8 Update Firmware
765-1205/100-000
[} 67].