Service; Resetting To Factory Settings; Updating Firmware - WAGO 765-1503/100-000 Product Manual

765-1503/100-000

Service

12

12.1 Resetting to Factory Settings

The device can be reset to the factory settings. Use the WAGO I/O Field Webserver for
this purpose.
You can find information on the procedure in
Settings

12.2 Updating Firmware

The firmware of the module can be updated. Use the WAGO I/O Field Webserver for this
purpose.
You need the firmware file corresponding to the module type. The name of the firmware
file is always FWUPDATE.zip; you can store it in a folder with the name of the module
(e.g., "765-1101").
You can find information on performing firmware updates in
Product manual | Version: 2.0.0
16DO FLD EI DC 24V 2.0A
[} 68].
8 Resetsetting the Module to the Factory
8 Update Firmware
Service
[} 66].
103