Updating Firmware - WAGO 765-4203/0100-0000 Product Manual

Commissioning
Name
Number of changes
(Change Count)
Date/time of the last ser-
vice (Last Service Date)
Date of the next service
(Next Service Date)
To make changes to the maintenance information:
1. From the Webserver main menu (left), select the Settings menu item
ð The Device Configuration tab appears.
2. Select the Maintenance Information tab.
3. Modify the relevant fields there.
4. Click the [Apply] button.
ð Your changes take effect.

10.3.1.4.5 Updating Firmware

With the Firmware upgrade tab, WAGO Webserver I/O Field provides an option for up-
dating the product firmware.
NOTICE
!
Put system in safe operating mode
Never perform a firmware update during ongoing operation of the system in which the
product is installed. Before any firmware update, the system must first be properly shut
down or put in a safe operating state.
82 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
Data Format and Length Description
ASCII decimal number, Counter for changes to the
max. 32 characters hardware or the device pa-
rameters; only needs to be
incremented if the data
has really changed.
ASCII time indication, Date/time of the last ser-
max. 32 characters vice, e.g., firmware up-
date.
ASCII time indication, Date/time of the next ser-
max. 32 characters vice, e.g., firmware update
Figure 22: Settings Menu Item, Firmware Upgrade Tab
765-4203/0100-0000
Corresponding I&M Field
I&M0: REV_COUNTER