Operational Description; Table 89 Bluetooth® Transmitter - WAGO 765-4203/0100-0000 Product Manual

Appendix
Changes or modifications made to this equipment not expressly approved by WAGO
Kontakttechnik GmbH & Co. KG may void the FCC authorization to operate this equip-
ment.

14.2 Operational Description

Product description
The product 0765-4203/0100-0000 is used to capture field signals on sensors, actuators
and hubs which have been sent or received by a higher-level controller and output them
via IO-Link.
Description of operation (FCC)
The product, a fieldbus module in the IP67 housing, serves the acquisition and output of
data via sensors and actuators for the industrial control technology. The integrated Blue-
®
tooth
monitoring using a mobile device and the WAGO App I/O Field.
The following figure shows the block diagram of the module.
ETHERNET
ETHERNET
Port (X01)
Bluetooth
Technology used
Modulation
Data rate
Work frequency
Maximum power including tune up tolerance
Antenna type
Maximum antenna gain
114 Product manual | Version: 1.0.0
4PORT IOL-A FLD EC DC 24V 2.0A
interface of the product allows the parameterization, operation, diagnosis, and
Bluetooth (BT)
logic + antenna
(X21)
Logic
(X22)
Port (X02)
®
Transmitter
Power
supply
(X31, X32)
I/O
...
®
Bluetooth Low Energy
GFSK
1 Mbit/s
2402 ... 2480 MHz
Output power: +8 dBm
Tolerance: +2 dBm / –3 dBm
PCB monopole
1.25 dBi
765-4203/0100-0000
®
Table 89: Bluetooth Transmitter