Starting The Instrument Console - Waters ACQUITY UPLC M-Class System Manual

Run LED indications:
LED mode and color
Unlit
Steady green
Flashing green
Flashing red
Steady red
Flashing red and green

Starting the instrument console

The instrument console is a software application that provides a way to
configure settings, monitor performance, run diagnostic tests, and maintain
the system and its modules. It replaces the keypads and small-screen displays
traditionally found on the front of system modules. The instrument console
functions independently of data applications and does not recognize or control
them.
From the instrument console's interface, you can quickly navigate to visual
representations of each module and its components. You can also navigate to
Starting the instrument console
Description
Module is idle.
The TVM is operating
normally, attempting to
complete any outstanding
samples. When sample
requests are finished, the
LED reverts to the unlit
mode.
Initializing and preparing for
normal operation.
Error state. Refer to the
instrument console for
information about the error.
Indicates a failure of a module
that prevents its further
operation. Power-off the
module, and then restart it. If
the LED is still steady red,
contact your Waters service
representative.
Used as a visual identification
of a module after it is selected
via the console.
March 10, 2014, 715003588 Rev. A 35