Instrument Control Panels; Solvent Manager Control Panels - Waters ACQUITY UPLC M-Class System Manual

3 Preparing the System
interactive diagrams, which show interconnections and provide diagnostic
tools for troubleshooting problems.
To start the instrument console from MassLynx software:
1. In the MassLynx window, click Inlet Method.
2. In the Inlet Method window, click the ACQUITY Additional Status tab.
3. Click Display console

Instrument control panels

You can monitor control panels for the ASM, μBSM, μSM-FL, TVM and
detector by means of the chromatography data system.
When software controls the system, the control panels appear at the bottom of
the Run Samples window. When MassLynx software controls the system, the
control panels appear on the Additional Status tab of the Inlet Editor window.

Solvent manager control panels

The ASM control panel and the μBSM control panel display flow status,
system pressure, total flow rate, and solvent composition parameters. You can
edit the value of these parameters when the system is idle by clicking the
underlined value. You cannot edit solvent-manager parameters while the
system is running samples.
µBSM control panel:
Status
System pressure
Flow rate
36 March 10, 2014, 715003588 Rev. A
.
Flow LED
Solvent composition
Stop flow