Waters ACQUITY UPLC M-Class System Manual page 82

B Specifications
System specifications: (Continued)
Feature
System synchronization
Maximum operating pressure
pH range
Total system delay volume
Unattended operation
Solvent storage
ASM performance specifications:
Feature
Column trapping pump (A side)
NanoLockSpray addition (B side)
Flow rate range
Solvent conditioning
Primary check valves
Compressibility compensation
Priming
Primary wetted materials
82 March 10, 2014, 715003588 Rev. A
Specification
Injection synchronization between
pumps and the sample manager
enhances retention time
reproducibility
103,421 kPa (1034 bar, 15,000 psi)
2 to 10
<1 uL
Full 96-hour diagnostic data display
through console software
Solvent tray accommodates eluents for
up to three wash solvents, and one
seal wash solvent
Specification
Choice of two eluents
Choice of two calibration solutions
A side: 0.0 mL/min to 1.0 mL/min
B side: 0.0 μL/min to 100.0 μL/min
Integrated vacuum degassing, six
lines
Intelligent Intake Valves (i
Automatic, no user intervention
required
Automatic, user programmable; wet
priming runs at a flow rate of
4 mL/min
UHMWPE blend, MP35N, titanium
alloy, gold, sapphire, ruby, zirconia,
DLC, fluoropolymer, fluoroelastomer,
PEEK, PEEK blend and PPS
2
Valve)