Waters ACQUITY UPLC M-Class System Manual page 93

2. Using the flat-blade screwdriver, attach the positive and negative leads
of the signal cable to the connector.
Screw
Signal cable
3. Fit the grounding cable's fork terminal on the rear panel grounding
stud, and secure the terminal with the locking nut.
Use the 9/32-inch nut driver to tighten the locking nut until the fork
Tip:
terminal does not move.
The documentation CD for more information on individual module
See also:
signal connectors.
Connector
Fork terminal
Locking nut
Grounding stud
March 10, 2014, 715003588 Rev. A
Signal connections
93