Instrument Control - Waters ACQUITY UPLC M-Class System Manual

B Specifications
TVM performance specifications:
Feature
Column capacity
Switching valves
Column compartment temperature
range
Column compartment temperature
accuracy
Column compartment temperature
stability
Primary wetted materials

Instrument control

The following table lists the instrument control specifications for the
ACQUITY UPLC M-Class system.
Instrument control specifications:
Feature
External communications
Event inputs/outputs
External control
User diagnostics
86 March 10, 2014, 715003588 Rev. A
Specification
Single column, 75 μm to 4.6 mm I.D.
and up to 250 mm in length
Two six-port, two-position valves with
independent programmable control
Ambient +9.0 to 90.0 °C, settable to
0.1 °C increments
(Column compartment temperature
lower range is equal to ambient +5° C)
±0.5 °C at sensor
±0.3 °C at sensor
DLC, PEEK blend and 316 stainless
steel
Specification
Ethernet interfacing via RJ45
connection to host PC
Rear panel contact closure and/or TTL
inputs/outputs
MassLynx Software
Available through software on the host
PC via the Instrument console
software