2
Preparing the System
This section describes the source installation and basic operating
procedures for the TRIZAIC UPLC System.
Contents:
Topic
Installing the TRIZAIC UPLC source
Starting up the system
Using MassLynx software to control the system
Preparing the system
Calibrating the system
Analyzing samples
See also:
nanoACQUITY UPLC documentation CD for detailed information on
operating and monitoring the system's instrument modules.
Installing the TRIZAIC UPLC source
You can install a TRIZAIC UPLC source on SYNAPT-series or Xevo-series
mass spectrometers.
Preparing the instrument for work performed on its source
Follow this procedure when a source is already installed on the mass
spectrometer.
Requirement:
working on the source.
The TRIZAIC UPLC System documentation CD and the
Follow the relevant procedure for your instrument before
Installing the TRIZAIC UPLC source
Page
2-1
2-9
2-11
2-12
2-13
2-19
2-1