Define The Type Of Measurement; Analyzer Probing Overview" On - Agilent Technologies 16712A Help Manual

ground each pod. Analysis probes, available for most common
microprocessors, can simplify the connection process.
The logic analyzer pods carry the signals to the logic analyzer from
your target system. Connect the pods either directly to the target
system or to an analysis probe. You can attach the pods either directly
to a 40-pin header, to a 20-pin header with an adapter, or use the
General Purpose Probes to attach to individual channels.
If you are using an analysis probe, Setup Assistant will guide you
through the process based on your logic analyzer and the analysis
probe.
Step 1: Describe the Measurement (see page 11)
See Also "Analyzer Probing Overview" on page 107 for more detail on types of
probes
Setup Assistant (see the Setup Assistant help volume)
Logic Analysis System and Measurement Modules Installation Guide
for probe pinout and circuit diagrams.

Define the Type of Measurement

There are two types of measurements: state measurements and
timing measurements. Use the Sampling tab to select either type
and to specify the details particular to that type.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
Setting Up a Measurement
11