Superset - Mitel SX-200 Manual

4.15 FEATURES DISPLAY AREA. The words displayed in this area
indicate the features that may be selected at any time. Those
features which are not in the Class of Service are not displayed.
Display of the words is initiated by pressing the DISPLAY FEATURES
key.
4.16 The meaning of each feature name is as follows:
This feature is automatically invoked after setting up type and destina-
tion. To cancel the feature, the user must press the SELECT FEATURES
key, dial 'l', and then press the OFF feature key. To reactivate the
feature, the user must press the SELECT FEATURES key, dial 'I', and
then press ttie ON feature key. When active, the word FWD is displayed
as a reminder.
2:N0 DIST'B Do Not Disturb.
This feature prevents an incoming call from ringing the user's set. To
activate, the user must press the SELECT FEATURES key, dial '2', and
then press the ON feature key. To cancel this feature, the user must
press the SELECT FEATURES key, dial '2', and then press the OFF
feature key. When active, the words NO DIST'B are displayed as a
reminder.
3:AUT0 ANS Automatic Answer.
Automatic Answer allows a user to answer an incoming call without
touching the set. The incoming call signals the user with a burst of
tone, and communication follows 'by
phone. At the end of the conversation, a burst of tone is heard by the
user to indicate the calling party has hung up. The set returns to the
auto-answer idle condition. To activate this feature, the user must
press the SELECT FEATURES key, dial '3', and then press the ON feature
key. To cancel this feature, the user must press the SELECT FEATURES
key, dial '3', and then press the OFF feature key. When active, the
words AUTO ANS are displayed as a reminder.
4:MSG Messaging.
This feature is used to read system messages' during an established
call. The word MSG flashing in the display notifies a user that there is
a message waiting to be read. To read the message during an estab-
lished call, the user must press the SELECT FEATURES key and dial '4'.
The prompt READ MSG is now displayed, and pressing this feature key
brings the message into view in the alphanumeric display. When the
message has been read, the user has three choices: CANCEL, NEXT or
EXIT. The CANCEL feature key cancels the current message and brings
the next message into view. Both NEXT and EXIT leave the current
message active. NEXT brings the next message into view. The EXIT
feature key exits from the feature and clears the display.
4 Telephone information
means of the speaker and micro-
Page 13