Electrical Safety; Environmental Conditions; Communication; Table 12 Electrical Safety - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000

4.4.5 Electrical Safety

Property
Insulation resistance
Test voltage
Min. creepage distance
Requirements
• Use of PELV/SELV power supplies (limited to 60 VDC)
• When SELV power supplies are used: SELV power supplies with supply via the same
network phase
• If PELV (Protective Extra Low Voltage) power supplies are used: PELV (Protective Ex-
tra Low Voltage) power supplies with a secondary power supply connection to the
common reference point

4.4.6 Environmental Conditions

Property
Surrounding air temperature (operation)
Surrounding air temperature (storage)
Maximum temperature change
Relative humidity (operation)
Pollution degree
Operating altitude
Overvoltage category
Protection type
Protection class
Vibration resistance
Shock resistance

4.4.7 Communication

Property
Communication Interfaces
Protocols
Property
Connection 1 (Exclusive Owner – 32 bytes per IO-Link
port)
Connection 2 (Exclusive Owner – 32 bytes per IO-Link
port without config)
Connection 3 (Listen only – 32 bytes per IO-Link port)
Connection 4 (Input Only – 32 bytes per IO-Link port)
Connection 5 (Exclusive Owner – 16 bytes per IO-Link
port)
Connection 6 (Exclusive Owner – 16 bytes per IO-Link
port without config)
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Table 12: Electrical Safety
Value
60 VDC
550 VAC RMS
0.7 mm
Table 13: Environmental Conditions
Value
–25 °C ... +70 °C
–40 °C ... +80 °C
3 K/min
5 % ... 95 %
3 (EN 60664-1)
0 ... 2000 m
II (EN 60664-1)
IP67 (EN 60529)
III (EN 61140)
5g (IEC 60068-2-6)
50g (IEC 60068-2-27)
Table 14: Communication
Value
ETHERNET, IO-Link, Bluetooth®
EtherNet/IP, HTTP, OPC UA, IO-Link
Table 15: Communication – EtherNet/IP device
Value
Input data: 276 bytes; output data: 276 bytes
Input data: 276 bytes; output data: 0 bytes
Input data: 148 bytes; output data: 148 bytes
Properties
23