Table 24 Process Data Of The Digital Inputs (Pin-Based Assignment); Table 25: Input Process Data - Connections 9 To 12 - WAGO TEchDocs 765-4501/0100-0000 Manual

765-4501/0100-0000
Byte Off-
set
4
Byte Off-
set
3
4
Input Process Data of Connections 9 to 12
The following table describes the structure of the input process data of connections 9
through 12.
Byte Off-
set
1
2
3 ... 4
5
6
7 ... 10
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Bit Input Process Data
1 Port X01, pin 2: DI B or mirrored DO B (depending on configuration)
... ...
6 Port X04, pin 4: DI A or mirrored DO A (depending on configuration)
7 Port X04, pin 2: DI B or mirrored DO B (depending on configuration)
0 Port X05, pin 4: DI A or mirrored DO A (depending on configuration)
1 Port X05, pin 2: DI B or mirrored DO B (depending on configuration)
... ...
6 Port X08, pin 4: DI A or mirrored DO A (depending on configuration)
7 Port X08, pin 2: DI B or mirrored DO B (depending on configuration)
Bit Input Process Data
0 Port X01, pin 4: DI A or mirrored DO A (depending on configuration)
1 Port X02, pin 4: DI A or mirrored DO A (depending on configuration)
... ...
6 Port X07, pin 4: DI A or mirrored DO A (depending on configuration)
7 Port X08, pin 4: DI A or mirrored DO A (depending on configuration)
0 Port X01, pin 2: DI B or mirrored DO B (depending on configuration)
1 Port X02, pin 2: DI B or mirrored DO B (depending on configuration)
... ...
6 Port X07, pin 2: DI B or mirrored DO B (depending on configuration)
7 Port X08, pin 2: DI B or mirrored DO B (depending on configuration)
Byte Input Process Data
Count
1 DI status
1 Dummy byte
2 DI data
1 Port X01: IO-Link PQI
1 Dummy byte
4 Port X01 (pin 4) functions as IO-
Link master: IO-Link input data
Port X01 (pin 4) functions as a
digital input: input data
Port X01 (pin 4) functions as
digital output: output data
Table 24: Process Data of the Digital Inputs (Pin-Based Assignment)
Table 25: Input Process Data – Connections 9 to 12
Description
0: DI data invalid.
1–255: DI data valid.
Reserved, 0
The port and pin assignment of process data depends
on the process data layout setting: pin-based or port-
based. See the following tables.
See 8 Process Image
Reserved, 0
IO-Link input data of the IO-Link device on port X01.
For a description of the data, see the manual from the
manufacture of the IO-Link device used.
Byte 7:
Bit 0 = 0: input off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Byte 8 ... 10: reserved.
Byte 7:
Bit 0 = 0: output off. Bit 0 = 1: Input on.
Bits 1 ... 7: always 0.
Functions
[} 47].
33