WAGO TEchDocs 765-4501/0100-0000 Manual page 50

Functions
Tool
WAGO Web-
server I/O Field
WAGO I/O
Field App
WAGO IO-Link
Configurator
Note
Parameters via EtherNet/IP are always rewritten upon restart.
If a connection is used for which the EtherNet/IP scanner transfers parameters to the
module, the scanner transfers the configuration and parameters to the module every time
the EtherNet/IP communication starts up.
Port configuration parameters that were set by the I/O Field Webserver, the I/O Field app
or the OPC UA client are overwritten.
If you want to (permanently) change port configuration parameters via the WAGO I/O
Field Webserver, the WAGO I/O Field app or the OPC UC client, set them with the IO-
Controller's configuration software.
50 Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
EtherNet/IP Port Configuration
Connection
IP scanner can import this EDS file. The
configuration of the EtherNet/IP scanner
can import this EDS file.
The user can configure and parameterize a
module. The user loads the configuration
onto the EtherNet/IP scanner. The Ether-
Net/IP scanner configures the module via
EtherNet/IP.
Whether or not the scanner sends parame-
ters (the port configuration) depends on the
connection selected. For example, if con-
nection 1 is used, the EtherNet/IP scanner
transfers parameters to the module.
For example, if connection 2 is used, the
EtherNet/IP scanner transfers no parame-
ters to the module, and the port must be
configured with a different tool.
8 Selecting a Connection [} 81]
scribes which connection causes EtherNet/
IP scanner parameters to be transferred
and which does not.
– Yes
– Yes
- Yes
765-4501/0100-0000
IO-Link Device Configuration
de-
Objects of the IO-Link device
can be written and read. For this
purpose, the WAGO I/O Field
Webserver users ISDU services
(ISDU = Indexed Service Data
Unit). This requires expert
knowledge and the object de-
scription for the IO-Link device
used.
The I/O Field Webserver does
not evaluate an IODD;
Yes
IODD can be used by the app to
parameterize an IO-Link device.
Yes
IODD can be used by the
WAGO IO-Link Configurator to
parameterize an IO-Link device.