765-4501/0100-0000
You have three options for each pin that supports the forcing function:
Option
Forcing – substitute value bit is set
(1)
Forcing – substitute value bit is
deleted (0)
No forcing for this pin
For entering these, there are two checkboxes in the table for each pin of a port: force for
switching the forcing functionality on/off, and set/clr for setting or deleting the setpoint
(1 bit); the latter checkbox is only relevant if the force box is checked. The following ap-
plies to this:
• All inputs for input simulation are entered in the right half of the table under "Input
process data"; all the inputs for output forcing are then entered in the left half of the ta-
ble under "Output process data."
You can find a description of and more information on the forcing function and explana-
tions of terms under
Each of the eight ports (X01 ... X08) has its own table row.
Concurrent Access
As long as one user is accessing the forcing functionality through a forcing medium, e.g.,
the WAGO I/O Field Webserver, it is locked for all other users of the module. They cannot
access the forcing functionality until the user that is active now terminates his or her ac-
cess.
Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Figure 27: DIO Forcing Menu Item, "DIO Forcing" Screen
Table 69: Input Options for Forcing for Each Pin of a Port
"Force" Checkbox
Checked
Checked
Not checked
8 Forcing
[} 47].
Commissioning
"Set/Clr" Checkbox
Checked
Not checked
No meaning
109