Power Supply; Table 11 Power Supply - WAGO TEchDocs 765-4501/0100-0000 Manual

Properties

4.4.4 Power Supply

Parameters
Supply voltage, 1L, 2L
Undervoltage warning, 1L
Overvoltage warning, 1L
Module power consumption
Power consumption of supply connections
Conductor cross-section
Reverse voltage protection
22 Product manual | Version: 1.1.0
8PORT IOL-A FLD EI DC 24V 2.0A
Value
24 VDC, –25 %/+30 % (18 VDC ... 31.2 VDC)
Voltages above 34 V can permanently damage the de-
vice.
Voltages below approx. 11 V lead to device reset.
18.0 V (± 5 % at 25 °C) message On,
18.3 V (± 5 % at 25 °C) message Off
30.0 V (± 5 % at 25 °C) message On,
29.7 V (± 5 % at 25 °C) message Off
1L: 100 mA (at 24 VDC)
2L: 10 mA (at 24 VDC)
Max. 16 A; ensure external limitation or use fuses in
the cables.
The maximum total current of the device, including
transmission between the power supply connections,
must not exceed 16 A for both 1L and 2L individually. If
additional modules are connected to X32 (PWR OUT),
it may be necessary for the maximum total current to
be monitored with external power supply management.
Maximum current: Observe derating depending on the
temperature.
2
For UL-compliant use: 2.5 mm
Yes
765-4501/0100-0000
Table 11: Power supply