Displaying Measured Values And Information On Connected Io-Link Devices - WAGO TEchDocs 765-4501/0100-0000 Manual

8-port io-link master class a; ethernet/ip; 24 v dc; 2.0 a; 8 × m12 connection

Table of Contents

Commissioning

10.3.1.3.2 Displaying Measured Values and Information on Connected IO-Link Devices

The Information tab shows the following information:

• The measured values and states of the port diagnostics

• The information on connected IO-Link devices

Displaying Pin- and Port-Specific Measured Values and States

The Information tab shows the following current measured values for each of pin 1, pin 2

and pin 4 of the selected port:

• Temperature of the pin, measured in °C

• Voltage on the pin, measured in volts

• Current flowing through the pin, measured in amperes

• State of the connection pin

States of the Connection Pin

The possible states of the connection pin are:

• OK

• Short circuit

• Module-internal overload protection has triggered

• Module-internal overtemperature protection has triggered

• Module-internal overvoltage protection has triggered

• Overcurrent

• Undercurrent

• Overtemperature

• Undertemperature

• Overvoltage

• Undervoltage

• Module-internal watchdog timer has elapsed

Product manual | Version: 1.1.0

8PORT IOL-A FLD EI DC 24V 2.0A

765-4501/0100-0000

Figure 12: Information Tab, Port XX Menu Item

Table of Contents

Table of Contents